Hydraulic CFD simulation resolves free-surface and pressurised water flow in detail, so water infrastructure can be assessed beyond what empirical formulas allow. These projects include wind-driven circulation in dam reservoirs, open channels with measurement weirs, and flow through porous rock-filled gabions. VOF free-surface and porous-media models predict water levels, head–discharge behaviour, energy dissipation and the downstream velocities that drive scour. Where standard hydraulic relationships exist, results are checked against them to build confidence before design decisions are made. The outcomes support civil and water engineers, and research laboratories, in sizing structures, placing measurement points and identifying where protection or geometric changes are needed.
CFD investigation of a centrifugal pump impeller identified where hydraulic losses originate in the blade passages, and provided design insight for improving…
View Project : CFD Investigation of a Centrifugal Pump ImpellerCFD simulation examined water flow through and over a rock-filled gabion, quantifying its hydraulic resistance, upstream water-level rise and the downstream flow…
View Project : CFD Simulation of Flow Through a Porous GabionCFD analysis of an open channel with a triangular (V-notch) weir supported the design of a hydraulic research facility, confirming the head–discharge…
View Project : CFD Analysis of an Open Channel with a Triangular WeirCFD simulation of a centrifugal fan evaluated pressure rise, internal losses and outlet flow quality, and located the impeller and volute features…
View Project : CFD Simulation of a Centrifugal Fan for Flow and Performance AnalysisCFD simulation of a hydraulic control valve examined internal flow behaviour, pressure variation and local high-velocity regions through the valve passage. Sector…
View Project : CFD Simulation of a Control Valve for Hydraulic SystemsA 3D CFD model was developed to predict circulation patterns in a dam reservoir and evaluate the influence of wind-driven airflow on…
View Project : CFD Prediction of Water Circulation Patterns in a Dam ReservoirCFD simulation was used to investigate cavitation in a centrifugal pump operating under slurry-service conditions. The analysis identified low-pressure and cavitation-prone regions…
View Project : Cavitation CFD Analysis of a Centrifugal Slurry PumpWorking on a similar problem?
Tell us about your geometry, operating conditions and the engineering question you need answered.
Discuss Your Project
